Hilgendorf Industriehalle Kopfbild

Elastomer sheets

Regardless of the quantity, size and future area of application, we bring our customers’ ideas and requirements into the right form for a wide range of applications.

Application and characteristics

  • Material EPDM 65 ±5 Shore A, black
  • smooth on both sides
  • Temperature resistant from -30 °C to +120 °C
Article numberThickness [mm]Width [mm]Roll length [mm]
1,01.40020.000
01000251,51.40020.000
01006532,01.40020.000
01006543,01.40010.000
01006554,01.40010.000
01000335,01.40010.000
01000686,01.40010.000
8,01.4005.000
10,01.4005.000
12,01.4005.000
15,01.4005.000
20,01.4005.000
25,01.4005.000
Hilgendorf Elastomerplatten

Are you searching for different dimensions or quantities?
We make it possible!

We would be happy to advise you personally on our standard products

Application and characteristics

  • Material NR/SBR 40 ±5 Shore A, grey
  • Material NR/SBR 40 ±5 Shore A, beige
  • Temperature resistant from -20 °C to +70 °C
Hilgendorf Elastomerplatten

Para-grey

Thickness [mm]Width [mm]Roll length [mm]
1,01.40020.000
1,51.40020.000
2,01.40020.000
3,01.40010.000
4,01.40010.000
5,01.40010.000
6,01.40010.000
8,01.4005.000
10,01.4005.000
12,01.4005.000
15,01.4005.000
20,01.4005.000
25,01.4005.000

Para beige

Thickness [mm]Width [mm]Roll length [mm]
2,01.40020.000
3,01.40010.000
4,01.40010.000
5,01.40010.000
6,01.40010.000
8,01.4005.000
10,01.4005.000

Silicone plates

Application and characteristics

  • Material silicone 40 ±5 Shore A, transparent
  • Material silicone 50 ±5 Shore A, transparent
  • Material silicone 60 ±5 Shore A, transparent
  • Suitable for foodstuffs
  • Material silicone 60 ±5 Shore A, red
  • Temperature resistant from -60 °C to +230 °C
Thickness [mm]Width [mm]Roll length [mm]
0.51.20030.000
1,01.20030.000
1.51.20030.000
2,01.20030.000
2,51.20010.000
3,01.20010.000
4,01.20010.000
5,01.20010.000
6,01.20010.000
8,01.2005.000
10,01.2005.000
Hilgendorf Elastomerplatten

Cellular products

Depending on the material and the batch size, we select the suitable manufacturing technique, e.g. stamping, water jet cutting or CNC contour cutting, for the processing of your articles. The products are subsequently bonded, welded, foil-clad or equipped with self-adhesion depending on your requirements. Economic feasibility and the required specifications of the products are what ultimately determine which technique will be used.

  • Application and characteristics

    • are used as sealing material, insulation, spacers or vibration protection
Zellige Produkte

Foam, type HH25-NZ-SKS

We have a selection of standard formats available.

  • Standard format 2,000 x 1,000 mm
  • Thicknesses > 2 to 50 mm

Customer-specific cutouts, strips or stamped parts according to patterns or drawings can then be obtained from these.

Application and characteristics

  • for sealing or insulating
  • Material EPDM BASIC, black
  • Closed cell cellular without an outside skin
  • Self-adhesive on one side to aid mounting
  • Tolerances in accordance with DIN 7715 Part 5 P3
  • Temperature resistant from -30 °C to +80 °C
Schaum, Typ HH25-NZ-SKS

Cellular rubber​

For sealing or insulating

Application and characteristics

  • Material EPDM or neoprene, black
  • Closed cell cellular without an outside skin
  • This means aqueous media can not infiltrate it
  • With and without self-adhesive layer (to aid mounting)
  • Tolerances in accordance with DIN 7715 Part 5 P3
  • Temperature resistant from -30 °C to +80 °C

Customer-specific cutouts, strips or stamped parts according to patterns or drawings can be obtained form the standard formats named below.

Article numberThickness [mm]Dimension
150002522.000 x 1.000
150002632.000 x 1.000
150002742.000 x 1.000
150002852.000 x 1.000
150003262.000 x 1.000
150003482.000 x 1.000
1500037102.000 x 1.000
1500080122.000 x 1.000
1500085152.000 x 1.000
1500086202.000 x 1.000
1500093252.000 x 1.000
Zellkautschuk

Cellular rubber strips

For sealing or insulating

Application and characteristics

  • for sealing or insulating
  • Material EPDM BASIC, black
  • Closed cell cellular without an outside skin
  • Self-adhesive on one side to aid mounting
  • Tolerances in accordance with DIN 7715 Part 5 P3
  • Temperature resistant from -30 °C to +80 °C

Customer-specific cutouts, strips or stamped parts according to patterns or drawings can be obtained form the standard formats named below.

Article numberDimension [mm]Packaging unit [m]
15000242 x 1010 Rolls à 10m
15001062 x 1510 Rollen à 10m
15001072 x 2010 Rollen à 10m
15001082 x 305 Rollen à 10m
15001092 x 405 Rollen à 10m
15001033 x 1010 Rollen à 10m
15001103 x 1510 Rollen à 10m
15000513 x 2010 Rollen à 10m
15001113 x 2510 Rollen à 10m
15001123 x 305 Rollen à 10m
15001133 x 405 Rollen à 10m
15001143 x 505 Rollen à 10m
15001154 x 1010 Rollen à 10m
01001564 x 1510 Rollen à 10m
01001604 x 2010 Rollen à 10m
0100211-14 x 255 Rollen à 10m
15001164 x 305 Rollen à 10m
15001174 x 405 Rollen à 10m
15001184 x 505 Rollen à 10m
15001195 x 1010 Rollen à 10m
15001205 x 155 Rollen à 10m
15001215 x 205 Rollen à 10m
15001225 x 255 Rollen à 10m
01000995 x 305 Rollen à 10m
15001235 x 405 Rollen à 10m
15001245 x 502 Rollen à 10m
15001255 x 602 Rollen à 10m
15001266 x 1010 Rollen à 10m
15000676 x 1510 Rollen à 10m
15001276 x 205 Rollen à 10m
15001286 x 255 Rollen à 10m
15001296 x 305 Rollen à 10m
15001306 x 402 Rollen à 10m
15001316 x 502 Rollen à 10m
15001326 x 602 Rollen à 10m
15001338 x 1010 Rollen à 10m
15001348 x 155 Rollen à 10m
15000638 x 205 Rollen à 10m
15001358 x 255 Rollen à 10m
15001368 x 305 Rollen à 10m
15001378 x 405 Rollen à 10m
15001388 x 505 Rollen à 10m
15001398 x 605 Rollen à 10m
150014010 x 105 Rollen à 10m
150014110 x 155 Rollen à 10m
150014210 x 205 Rollen à 10m
150014310 x 255 Rollen à 10m
010110010 x 302 Rollen à 10m
150014410 x 402 Rollen à 10m
150014510 x 502 Rollen à 10m
150014610 x 602 Rollen à 10m
150014715 x 202 Rollen à 10m
150014815 x 302 Rollen à 10m
150014915 x 402 Rollen à 10m
Zellkautschuk

Sponge rubber plates​

Customer-specific cutouts, strips or stamped parts according to patterns or drawings can be obtained from these.

Further qualities upon request.

Application and characteristics

  • high degree of elasticity of compression and good resilience
  • Material EPDM, black
  • With skin on both sides, cutting edges with open pores
  • With and without self-adhesive layer (to aid mounting)
  • Standard format 2,000 x 1,000 mm
  • Thicknesses from 2 to 50 mm
  • Temperature resistant from -40 °C to +100 °C
Zellkautschuk