• DE Ι 
  • EN
Menu
Hilgendorf GmbH + Co.

RKE-AF plates and pre-fabricated parts acc. DIN EN 45545-2 or 5510-2

Serve as an interlayer for balancing out construction tolerances or as an element to dampen sounds between two materials.

RKE-AF meets the standards of the rail vehicle industry and is fire-protected in accordance with DIN EN 45545-2. The fire prevention classification is only valid for the material. In combination with other materials (e. g. coatings, deposits) the fire behaviour can be influenced unfavorably, so that the classification is not valid any more. The fire behaviour of the material in the group with other materials is to be proved separately.

  • Specific weight: approx. 1.9 g/cm³
  • Temperature resistant: approx. -40°C to +220°C (for short periods up to +280°C)
  • Low moisture absorbency
  • Smooth surface
  • Bondable
  • Semi-elastic
  • Can be processed mechanically (drilling, cutting or grinding)
  • Resistant to vapour, gas, fuels, oils, weak acids and water
Art. No. Thickness Dimensions Self-adhesive film Comment
  [mm] [mm]    
1401539 0,5 1.500 x 1.500 yes DIN 5510
1400052 0,5 1.500 x 1.500   EN 45545-2
1400007 1 1.500 x 1.500 yes DIN 5510
1400008 1 1.500 x 1.500   EN 45545-2
1400014 2 1.500 x 1.500   DIN 5510
1400012 2 1.500 x 1.500 yes DIN 5510
1400015 2,5 1.500 x 1.500   DIN 5510
1400016 3 1.500 x 1.500   DIN 5510
1400018 3 1.500 x 1.500 yes DIN 5510
1400013 3 1.500 x 1.500 yes EN 45545-2
1400021 4 1.500 x 1.500   DIN 5510
1400022 4 1.500 x 1.500 yes DIN 5510
1400019 4 1.500 x 1.500 yes EN 45545-2
1400031 5 1.500 x 1.500   DIN 5510
1400028 5 1.500 x 1.500 yes DIN 5510
1400029 5 1.500 x 1.500 yes EN 45545-2
1400033 6 1.500 x 1.500   DIN 5510
1400030 6 1.500 x 1.500 yes DIN 5510
1400038 7 1.500 x 1.500 yes DIN 5510 (doubled of 3 + 4 mm)
1400032 8 1.500 x 1.500   DIN 5510 (doubled of 2 x 4 mm)
1400035 10 1.500 x 1.500   DIN 5510 (doubled of 2 x 5 mm)
1400039 12 1.500 x 1.500   DIN 5510 (doubled of 2 x 6 mm)

We have a selection of standard formats available.

Customer-specific cutouts, strips or stamped parts according to patterns or drawings can then be obtained from these.